Sign up Latest Topics
 
 
 


Reply
  Author   Comment  
BadBob

Avatar / Picture

Registered:
Posts: 1,471
Reply with quote  #1 

I'm not an expert with either of the software packages discussed here. Once I know what I want to do I ask the Google oracle for help and it always provides. If you have questions, you should ask Google. There are a lot of videos on YouTube, and some books are available. The learning curve is steep. If you are only going to make one toy and don't intend to make batches or modify the patterns, it may not be worth the effort to learn about these tools.

This isn't a tutorial. It is a simple explanation of how I use Gimp and Inkscape in my toymaking.

The first step I take when making something for the first time is to convert the patterns to SVG. I load the bit map patterns into Gimp and clean them up. The bitmaps get copied into Inkscape and converted into the SVG format.

Why?

First I get sharp, precise lines when you print the patterns. When you print from bitmaps the edges of the lines are jagged and fuzzy. If you want to enlarge the pattern, it gets worse. With the SVG format, the jagged edges disappear.

I can enlarge them or shrink them to the size I need with no loss of detail.

I can change the color of the pattern. Some people like to use red lines to help distinguish the blade from the line.

I can get rid of the junk that I don't need like shading, colors, grain lines and text that get in the way and sometimes confuse things or make it hard to see the pattern when I am cutting. They also waste toner.

Want to fill the page with patterns? I have made pages of Play Pals and animal cutouts that I print and get whole pages full of patterns. Perhaps 20 on a page.

One of the things I have been experimenting with is fitting the patterns to the size of the wood I have in Inkscape. I paste and arrange the patterns to fit the wood I am using and print — no more struggling with organizing patterns on my wood with glue on them.

Efficient use of what would be waste is much easier. For example, when I am making my dragon puzzles, two large corner areas are just big enough for a small car or animal cut out. In Inkscape, I paste the patters into these corners. When I'm done cutting that piece of wood, I have a puzzle and two small toys.

Do you want thicker lines so you can see them better? Not a problem.  The same is true for wanting finer lines. I'm not too good at this yet, but I'm working on it.

An issue I have not confronted yet but plan to in the future is resizing patterns where the parts need to fit each other precisely. A simple example of this would be a puzzle where you want to make the parts from different colors of wood. Intarsia and segmented scroll saw art would be another.

Gimp and Inkscape are primary tools in my Toy Makers toolbox. Maybe they should be in yours.

--


__________________
Advanced techniques are the basics perfectly applied.
Odin's Toy Factory Etsy Store
Facebook
Pinterest
Blogger
Forum Photo Album

LinkedIn
YouTube
Google Photos Toys Album

john lewman

Avatar / Picture

Owner, ToymakingPlans.com
Registered:
Posts: 2,467
Reply with quote  #2 
Thanks for taking the time to post this information about Gimp and Inkscape. It is time that I take the time to learn these things and add them to my toymaking toolbox. I really appreciate this.

On multi wood puzzles, I think it is Steve Good who stacks 3 pieces of 1/4" wood of different types then cuts out the puzzle thru all 3 pieces at once. That way he gets 3 puzzles that are all a different grouping of colors but all the pieces fit interchangeably.
StewRat

Avatar / Picture

Registered:
Posts: 25
Reply with quote  #3 
Realise this is an older post but just catching up on some reading 😉

Just wanted to second this suggestion - I use both these programs as free alternatives to the very expensive Photoshop and Illustrator.

InkScape especially is a hidden gem well worth the learning.

One of the great things you can do with it is open PDF files and edit the lines/curves within them. So a design, plan, line illustration in a PDF becomes (with the right permissions) available as raw material to modify, scale etc.

And because it uses real-world dimensions and is vector based, it teams up nicely with things like sketchup (and a simpler alternative I've forgotten the name of) if you want to take a shape and see what it looks like in 3D. 

Stewart
Loggerlaws

Registered:
Posts: 65
Reply with quote  #4 
Hi all,
       I have not seen or read this post before but like the tips and comments that BadBob has shared here. As a result of this post I wonder if John could include the patterns that we actual cut out in svg"  format, then as you say BadBob we could scale up or down or move around in inkscape to even miss bark, nail holes or knots. Thanks BadBob for this work flow plan.

Cheers Raymond
dragon54

Registered:
Posts: 7
Reply with quote  #5 
I am new to these forums this is great stuff just watt I need cheers. 
Previous Topic | Next Topic
Print
Reply

Quick Navigation:

Easily create a Forum Website with Website Toolbox.